淡江大學機械與機電工程學系

:::

本系教師

基本資料表

名稱史建中

信箱cjs@mail.tku.edu.tw

自我介紹學歷：
美國佛羅里達大學機械工程所 (最佳設計) 博士
美國佛羅里達大學機械工程所 (機械設計) 碩士
美國佛羅里達大學應用力學所碩士
國立台灣科技大學機械工程學系學士
經歷：
淡江大學機械與機電工程學系教授
美國佛羅里達大學Teaching and Research Assistant
南亞塑膠公司工務部機械設計高級工程師
南亞塑膠公司纖維事業部機械工程師

教師

類別兼任教師

職稱榮譽教授

OfficeHour

授課領域1.機動學　
2.機械設計
3.進階工程最佳化　

研究專長1.最佳化原理及設計
2.智慧型計算工程
3.機械工程設計
4.工程力學

年度	論文名稱
2016	Cheng-Yang Liu; Shih-Hsuan Lin; Chien-Jong Shih, In-plane polarimetric light scattering imaging of wooden surfaces, , Lasers in Engineering 37(1-3), p.1-15, , pp
2015	Ching-Yu Hsu; Tso-Liang Teng; Cho-Chung Liang; Hai-Anh Nguyen; Chien-Jong Shih, The study on the dynamic response of cylindrical pressure hull on the different shock loading empirical formula, , Applied Mechanics and Materials 799-800, pp.604-609, , pp
2015	Zi-peng Zhang; Chiu-Wen Lin; Tso-Liang Teng; Ching-Yu Hsu; Cho-Chung Liang; Yang Wang; Chien-Jong Shih, Analysis of the energy absorption capacity of vehicle front components in crash, , Applied Mechanics and Materials 799-800, pp.808-813, , pp
2015	Teng, Tso-Liang; Liang, Cho-Chung; Hsu, Ching-Yu; Shih, Chien-Jong; Tran, Thanh-Tung, Impact Performance of W-beam Guardrail Supported by Different Shaped Posts, , International Journal of Mechanical Engineering and Applications 4(2), p. 59-64, , pp
2014	Ching Yu Hsu; Tso Liang Teng; Cho Chung Liang; Wu Chang Kuo; Chien Jong Shih; Van Hai Nguyen, Numerical Simulation of Helmeted Headform Drop Test Based on the EN1078 Standard, , Applied Mechanics and Materials 644-650, pp.798-802, , pp
2013	Teng, Tso-Liang; Liang, Cho-Chung; Shih, Chien-Jong; Nguyen, Manh-Trung, Design of Car Hood of Sandwich Structures for Pedestrian Safety, , International Journal of Vehicle Design 63(2/3), pp.185-198, , pp
2012	Teng, Tso Liang; Liang, Cho Chung; Shih, Chien Jong; Nguyen, Van Hai, Simulation of Bicycle Helmet Impact Test Based on the CPSC Standard, , Advanced Materials Research 538-541, pp.744-747, , pp
2012	Shih, Chien-Jong; Yeh, Chi-Nan; Chang, Ting-Hao, Experimental Optimization and Analysis of Intake and Exhaust Pipeline for Small Engine Motorcycle, , Journal of Applied Science and Engineering=淡江理工學刊 15(1), pp.21-30, , pp
2012	史建中; 林俊毅; 鄧作樑, 處理奇異性的新三點近似法結構優化設計, , 第八屆海峽兩岸航空太空學術研討會論文集(第4冊)，頁618-624, , pp
2012	Shih, C.J.; Lin, P-H, Constrained Structural Optimization of Electro-Thermal Microactuator Using Double Chromosome Genetic Evolution, , Advanced Materials Research: Micro Nano Devices, Structure and Computing Systems II 677, p.136-141, , pp
2012	Shih, C.J.; Teng, T-L; Liang, C-C; Huang, Y. A, Optimum Slide-way Structural Design for A New Polarized Scattering Instrument, , Advanced Materials Research 706-708, p.888-891, , pp
2012	Teng, Tso Liang; Liang, Cho Chung; Shih, Chien Jong; Van Hai Nguyen, Design and Analysis of Bicycle Helmet with Impact Foam Liner, , Advanced Materials Research 706-708, pp.1778-1781, , pp
2011	Teng, Tso Liang; Liang, Cho Chung; Shih, Chien Jong; Nguyen, Manh Trung, Study of Carbon Fiber/Polycarbonate (CF/PC) Material Sandwich Structure for Vehicle Hood, , Advanced Materials Research 287-290, pp.472-476, , pp
2011	Shih, Chien Jong; Chang, Ting Hao; Teng, Tso Liang, An Intake Three-Pipeline Model Using Experimental Optimization for a Small Engine, , Advanced Materials Research 421, p.683-686, , pp
2011	史建中; Chang, T- H; Teng, T- L, An Intake Three-pipeline Model Using Experimental Optimization for a Small Engine, , The 2nd/2011 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2011), , pp
2011	鄧作樑; 梁卓中; 史建中; 胡博翔, 駕駛坐姿與氣囊防護效益之研究, , 車輛工程學刊 9，頁25-38, , pp
2010	Shih, Chien-jong; Yeh, Chi-nan; Chang, Ting-hao, Experimental Design Optimization for Two-pipeline Intake System on a Small Engine, , Advanced Materials Research 156-157, pp.1176-1180, , pp
2009	Shih, Chien-Jong; Chen, Kuang-You, Topological Optimum Design Considering Stress Constraint Using Approximate Function, , Key Engineering Materials 419-420, pp.25-28, , pp
2009	Shih, Chien‐jong; Chen, Kuang‐you, Structural topology optimization with empirical constraints, , Journal of the Chinese Institute of Engineers=中國工程學刊 33(4), pp.515-523, , pp
2009	Shih, Chien-Jong; Chen, Kuang-You, An Integrated Design Optimization for Monolithic Mechanical Amplifier in PZT Nano-Positioning Stage, , 淡江理工學刊=Tamkang Journal of Science and Engineering 13(2)，頁165-172, , pp
2008	Kuo, Chin-hsing; 史建中; Shih, Chien-jong, Computational Identification of Link Adjacency and Joint Incidence in Kinematic Chains and Mechanisms, , Journal of Mechanical Design 130(8), pp.084501(9 pages), , pp
2008	史建中; Shih, Chien-jong; Kuan, T. L., Immune Based Hybrid Evolutionary Algorithm for Pareto Engineering Optimization, , 淡江理工學刊 = Tamkang Journal of Science and Engineering 11(4), pp.395-402, , pp
2006	Shih, C.J.; Lin, C.F.; Chen, H.Y., An Integrated Design of Flexure Hinges and Topology Optimization for Monolithic Compliant Mechanism, , Journal of Integrated Design and Process Science10(3), pp.1-16, , pp
2006	Shih, C. J.; Lee, H. W., Modified Double-Cuts Approach in 25-bar and 72-bar Fuzzy Truss Optimization, , Computers and Structures 84(29-30), pp.2100-2104, , pp
2005	Shih, C. J.; Lin, C. F., A Two-stage Topological Optimum Design for Monolithic Compliant Microgripper Integrated with Flexure Hinges, , Journal of Physics34, , pp
2004	Shih, Chien-jong; Tseng, Ting-chang, Reliability-Based Optimization of Robust Feasibility in Mechanical Design Using PVP Technique and Fuzzy Formulation, , Journal of the Chinese Institute of Engineers=中國工程學刊 28(1), pp.77-88, , pp
2004	Lin, C. F.; Shih, Chien‐jong, Multiobjective Design Optimization of Flexure Hinges for Enhancing the Performances of Micro-Compliant Mechanisms, , Journal of the Chinese Institute of Engineers=中國工程學刊 28(6), pp.999- 1003, , pp
2004	Shih, C. J.; Lee, H. W., Level-cut approaches of first and second kind for unique solution design in fuzzy engineering optimization problems, , 淡江理工學刊=Tamkang journal of science and engineering 7(3), pp.189-198, , pp
2004	Shih, C. J.; Liu, G. C., Optimal design methodology of plate-fin heat sinks for electronic cooling using entropy generation strategy, , IEEE Transactions on Components and Packaging Technologies 27(3), pp.551-559, , pp
2003	Shih, C. J.; Chi, C. C.; Hsiao, J. H., Alternative α-level-cuts methods for optimum structural design with fuzzy resources, , Computers and structures 81(28-29), pp.2579-2587, , pp
2002	Lin, C. F; Shih, C. J., Topological optimum design of a compliant mechanism for planar optical modulator, , 淡江理工學刊=Tamkang journal of science and engineering 5(3), pp.151-158, , pp
2001	Shih, C. J.; Yang, Y. C., Generalized Hopfield network based structural optimization using sequential unconstrained minimization technique with additional penalty strategy, , Advances in Engineering Software 33(7-10), pp.721-729, , pp
2000	Shih, C. J.; Tseng, T. J., Optimal Mechanical Design with Robust Performance by Fuzzy Formulation Strategy, , 淡江理工學刊=Tamkang journal of science and engineering 4(1), pp.71-79, , pp
1998	Shih, C. J.; Chang, C. C., Hopfield neuron based nonlinear constrained programming to fuzzy structural engineering optimization, , Structural engineering and mechanics 7(5), pp.485-502, , pp
1997	Shih, C. J.; Liu, Woe-chun; Wangsawidjaja, R. A. S., Reliability-based optimization and application of fuzzy theory for robust structural design, , Tamkang journal of science and engineering1(1), pp.31-37, , pp
1997	Shih, C. J.; Yu, K. C., Methods of pairwise comparisons and fuzzy global criterion for multiobjective optimization in structural engineering, , Structural engineering and mechanics 6(1), pp.17-30, , pp
1997	史建中; Shih, C. J.; 劉偉均; Liu, Woe-chun; 王植達; Wang sawidjaja, R. A. S., Reliablity-Based Optimization and Application of Fuzzy Theory for Robust Structural Design, , 淡江理工學刊=Tamkang journal of science and engineering 1(1), pp.31-37, , pp
1996	Shih, C. J., Fuzzy and improved penalty approaches for multiobjective mixed-discrete optimization in structural systems, , Computers and structures 63(3), pp.559-565, , pp
1995	Shih, C. J.; Wangsawidjaja, R. A. S., Mixed fuzzy-probabilistic programming approach for multiobjective engineering optimization with random variables, , Computers and structures 59(2), pp.283-290, , pp
1994	Shih, C. J.; Lai, T. K., Mixed-discrete fuzzy programming for nonlinear engineering optimization, , Engineering optimization 23(3), pp.187-199, , pp
1994	Shih, C. J.; Lai, T. K., Fuzzy weighting optimization with several objective functions in structural design, , Computers and structures 52(5), pp.917-924, , pp
1994	Shih, C. J.; Chang, C. J., Pareto optimization of alternative global criterion method for fuzzy structural design, , Computers and structures 54(3), pp.455-460, , pp
1994	Shih, C. J.; Yu, K. C., Weighting objectives strategy in multicriterion fuzzy mechanical and structural optimization, , Structural engineering and mechanics 3(4), pp.373-382, , pp
1989	Hajela, P.; Shih, Chien-jong, Use of an advanced shear-lag model to obtain the optimum internal damping in short-fiber composite, , Applied Mechanics Reviews 42(11), pp.93-99, , pp
1989	Hajela, P.; 史建中; Shih, Chien-jong, Multiobjective optimum design in mixed integer and discrete design variable problems, , AIAA Journal 28(4), pp.670-675, , pp
1989	史建中; Shih, Chien-jong; Hajela, P., Multicriterion optimum design of belleville spring stacks with discrete and integer desicion variables, , Engineering Optimization 15(1), pp.43-55, , pp
1988	Hajela, P.; Shih, C. J., Optimal design of laminated composites using a modified mixed integer and discrete programming algorithm, , Journal of computers and structures32(1), pp.213-221, , pp
1987	Hajela, P.; Shih, Chien-jong, Optimum synthesis of polymer matrix composites for improved internal material damping characteristics, , AIAA Journal 26(4), pp.504-506, , pp

年度	論文名稱
2016	史建中; 鄧作樑; 趙宜奕, 全仿生物免疫系統於桁架結構型態及尺寸設計最佳化, , 第十屆海峽兩岸航空航天學術研討會, , 2016-08-30-
2015	史建中; 陳博軒; 鄧作樑, 全仿免疫系統之多目標限制結構工程設計最佳化, , 中華民國力學學會第三十九屆全國力學會議, , 2015-11-20-
2015	胡光宗; 史建中, LED路燈透鏡合成及陣列一體化分析, , 中國機械工程學會第三十二屆全國學術研討會, , 2015-12-11-
2015	鄭向為; 史建中, 含兩點近似函數的粒子群限制最佳化設計, , 中國機械工程學會第三十二屆全國學術研討會, , 2015-12-11-
2014	史建中; 鄧作樑; 林博然, 轉換雙目標策略處理限制的粒子群最佳化, , 第九屆海峽兩岸航空太空學術研討會, , 2014-11-18-
2014	Ching-Yu Hsu; Tso-Liang Teng; Cho-Chung Liang; Hai-Anh Nguyen; Chien-Jong Shih, Underwater shock and bubble pulse responses of a rectangular plate subjected to underwater explosion, , The 2015 7th International Conference on Mechanical and Electrical Technology (ICMET 2015), , 2015-07-01-
2013	Shih, Chien-Jong; Teng, Tso-Liang; Huang, Yong-An, Optimizing the Structure of a Four-axis Polarized Scattering Instrument using a Double-loop Approach, , International Symposium on Precision Mechanical Measurements, , 2013-08-08-
2013	蔡仲達; 史建中, 非支配策略處理限制的雙目標免疫最佳化, , 中國機械工程學會第三十屆全國學術研討會, , 2013-12-06-
2013	林俊毅; 史建中; 鄧作樑; 胡光宗, 混合TANA1及TDQA2的近似法最佳化於鋼結構設計, , 中國機械工程學會第三十屆全國學術研討會, , 2013-12-06-
2013	陳紀鋼; 史建中, 一種LED光源集光器的設計分析及最佳化探討, , 中國機械工程學會第三十屆全國學術研討會, , 2013-12-06-
2013	林博然; 史建中; 鄧作樑; 鄭向為, 轉換目標策略的粒子群限制最佳化, , 中國機械工程學會第三十屆全國學術研討會, , 2013-12-06-
2013	Shih, Chien-Jong; Teng, Tso-Liang; Chen, Shiau-Kai, A Niche-Related Particle Swarm Meta-Heuristic Algorithm for Multimodal Optimization, , International Conference on Intelligent Technologies and Engineering Systems (ICITES 2013), , 2013-12-12-
2012	史建中; 黃永安; 鄧作樑; 林俊毅, 偏光散射檢測儀的長滑軌結構最佳化設計, , 中國機械工程學會101年度年會暨第二十九屆全國學術研討會, , 2012-12-07-
2012	史建中; 林博然; 陳紀鋼, 粒子群演算法於電熱微致動器最佳化設計, , 中國機械工程學會101年度年會暨第二十九屆全國學術研討會, , 2012-12-07-
2012	史建中; 林俊毅; 鄧作樑, 處理奇異性的新三點近似法結構優化設計, , 第八屆海峽兩岸航空太空學術研討會, , 2012-09-04-
2012	Shih, C.J.; Lin, P-H, Constrained Structural Optimization of Electro-Thermal Microactuator Using Double Chromosome Genetic Evolution, , 2nd International Conference on Micro Nano Devices, Structure and Computing Systems (MNDSCS 2013), , 2013-01-23-
2012	Shih, C. J., Teng, T. L., Liang, C.C. Huang, Y. A., Optimum Slide-way Structural Design for A New Polarized Scattering Instrument, , Proceedings of MIM 2013, , 2013-05-18-
2012	Teng, Tso-Liang; Liang, Cho-Chung; Shih, Chien-Jong; Nguyen, Van-Hai, Design and Analysis of Bicycle Helmet with Impaxx Foam Liner, , 3rd International Conference on Mechatronics and Intelligent Materials (MIM 2013), , 2013-05-18-
2012	Shih, C.J.; Tsai, C. D.; Teng, T. L., Genetic based Structural Optimization with Handling Constraints as Additional Objective, , Asian-Pacific Conference on Aerospace Technology and Science (APCATS 2013), , 2013-05-23-
2011	史建中; 林柏宏; 黃永安, 類基因移植的限制遺傳演算法結構最佳化, , 2011中華民國力學學會年會暨第三十五屆全國力學會議=2011 Annual Meeting for the Society of Theoretical and Applied Mechanics of the Republic of China and the 35th National Conference on Theoretical and Applied Mechanics, , 2011-11-18-
2011	史建中; 鍾金曄; 林俊毅, 含奇異點處理的三點近似法最佳化, , 2011中華民國力學學會年會暨第三十五屆全國力學會議=2011 Annual Meeting for the Society of Theoretical and Applied Mechanics of the Republic of China and the 35th National Conference on Theoretical and Applied Mechanics, , 2011-11-18-
2011	史建中; 陳志忠; 林博然, 改良飛回策略的粒子群演算法結構最佳化, , 2011中華民國力學學會年會暨第三十五屆全國力學會議=2011 Annual Meeting for the Society of Theoretical and Applied Mechanics of the Republic of China and the 35th National Conference on Theoretical and Applied Mechanics, , 2011-11-18-
2011	史建中; 蘇育德; 林博然, 可變長寬的電熱式微致動器最佳化設計, , 中國機械工程學會百年年會暨第28屆全國學術研討會, , 2011-12-10-
2011	史建中; 蘇冠丞; 黃永安, 趨近實際機率分布的可靠度設計最佳化, , 中國機械工程學會百年年會暨第28屆全國學術研討會, , 2011-12-10-
2009	史建中, 小型引擎可變進氣二管系統的實驗設計與分析, , 中國機械工程學會第二十六屆全國學術研討會, 台南市, , 2009-11-20-
2009	史建中, 適應縮減回應面及階切策略於多目標結構模糊最佳化設計, , 中國機械工程學會第二十六屆全國學術研討會, 台南市, , 2009-11-20-
2009	史建中, Topological Optimum Design Considering Stress Constraint Using Approximate Function, , The 2nd International Conference on Advanced Design and Manufacturing (ADM 2009), Harbin, China, , 2009-09-24-
2009	史建中, Design Optimization and Analysis Applying DOE for Intake and Exhaust Pipeline of a Motorcycle, , The 3rd International Conference on Mechanical Engineering and Mechanics(3rd ICMEM), Beijing, China, , 2009-10-21-
2009	史建中; 郭于鴻, 結構優化設計的準三次兩點保守近似法, , 第七屆海峽兩岸航空太空學術研討會, , 2010-11-16-
2009	史建中, 適應回應面法解離散變數的結構模糊最佳化設計, , 中華民國力學學會年會暨第33屆全國力學會議, , 2009-11-13-
2009	史建中, 結構性能函數的進階三點近似法, , 中華民國力學學會年會暨第33屆全國力學會議, , 2009-11-13-
2009	史建中, 兩段加強粒子群策略的結構最佳化, , 中華民國力學學會年會暨第33屆全國力學會議, , 2009-11-13-
2008	史建中, 局部近似法工程最佳化的探討及軟體應用, , 中國機械工程學會第二十五屆全國學術研討會, 彰化大村, , 2008-11-21-
2008	史建中, 發展免疫演化法的最佳化於結構及其型態設計, , 中國機械工程學會第二十五屆全國學術研討會, 彰化大村, , 2008-11-21-
2008	史建中, 適應縮減回應面近似法及雙切策略於結構模糊最佳化設計, , 中國機械工程學會第二十五屆全國學術研討會, 彰化大村, , 2008-11-21-
2008	史建中, Micro Compliant Amplifier Design Using Topology Optimization Technique, , The 25th National Conference on Mechanical Engineering (CSME 2008), 彰化大村, , 2008-11-21-
2008	史建中, 小型引擎進氣管路的實驗設計最佳化, , 中國機械工程學會第二十五屆全國學術研討會, 彰化大村, , 2008-11-21-
2008	史建中, 免疫原理的進化式多極值最佳化演算法, , 第十六屆模糊理論及其應用研討會, 桃園, , 2008-12-20-
2008	史建中, Response Surface Based Structural Optimization with Single-Cut Strategy for Fuzzy Limit Problems, , The Ninth International Conference on Computational Structures Technology, Athens, Greece, , 2008-09-02-
2008	鄧建中; 史建中; 楊家鵬, 響應面法可靠度基的結構最佳設計, , 2008中華民國力學學會年會暨第三十二屆全國力學會議=2008 the 32nd National Conference on Theoretical and Applied Mechanics, , 2008-11-28-
2008	史建中; 王正堯; 詹景隆; 莊育清, 應用回應表面近似法解離散變數的結構最佳化設計, , 2008中華民國力學學會年會暨第三十二屆全國力學會議=2008 the 32nd National Conference on Theoretical and Applied Mechanics, , 2008-11-28-
2007	史建中, 序列適應性回應面法整合於有限元結構最佳化設計, , 中國機械工程學會第二十四屆全國學術研討會, 桃園中壢, , 2007-11-23-
2007	史建中, 相繼縮小回應表面近似法於大型結構模糊最佳化設計, , 中國機械工程學會第二十四屆全國學術研討會, 桃園中壢, , 2007-11-23-
2007	史建中, A Structural Topology Optimization Including Minimum Compliance and Weight with Constraints of Volume Fraction Design Variable, , International Conference on Mechanical Engineering and Mechanics (ICMEM2007), Wuxi, China, , 2007-11-05-
2007	史建中, Optimum Topological Design for Mechanical Amplifying Mechanism Integrated in PZT Nano-Positioning Stage, , EngOpt 2008 - International Conference on Engineering Optimization, Rio de Janeiro, Brazil, , 2008-06-01-
2007	史建中; 詹景隆 ;陳品揚; 趙宜奕, 單切策略的適應性回應表面法於結構模糊最佳化設計, , 中華民國力學學會年會暨第三十一屆全國力學會議=The 31th National Conference on Theoretical and Applied Mechanics, , 2007-12-21-
2007	史建中, A Computational Approach for Structural Reliability Using Sequential RSM and FORM, , 中華民國力學學會年會暨第三十一屆全國力學會議=The 31th National Conference on Theoretical and Applied Mechanics, , 2007-12-21-
2007	史建中; 趙宜奕; 張庭豪; 陳匡佑; 鄧建中; 陳運正; 陳文祥, 大型規格結構的模糊最佳化設計(II), , 機械固力學門成果發表會, , 2007-11-23-
2007	史建中; 王正堯; 莊育清; 趙宜奕, 相繼縮小回應表面近似法於大型結構模糊最佳化設計, , 2007 CSME CONF中國機械工程學會第24屆全國學術研討會=The 24th National Conference on Mechanical Engineering the Chinese Society of Mechanical Engineers, , 2007-11-23-
2007	Shih, C. J.; Deng, J. Z.; Huang, H. H.; Chen, F. C., A Computational Approach for Structural Reliability Using Sequential RSM and Form, , 中華民國力學學會年會暨第三十一屆全國力學會議=The 31th National Conference on Theoretical and Applied Mechanics, , 2007-12-21-
2006	史建中, 機械元件之最佳性能與容差設計, , 中國機械工程學會第二十三屆全國學術研討會, 台南、永康, , 2006-11-24-
2006	史建中, 處理混合變數及限制函數的遺傳演算最佳機械結構與元件設計, , 中國機械工程學會第二十三屆全國學術研討會, 台南永康, , 2006-11-24-
2006	史建中, A Simplified Design Process Integrated with Flexure Hinge for Topological Optimization of Compliant Mechanism, , The Fourth China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK OSM4), 中國昆明, , 2006-11-06-
2006	史建中, Revised Double-Cuts Strategy for Fuzzy Structural Optimization, , The Fourth China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK OSM4), 中國昆明, , 2006-11-06-
2006	史建中, An Artificial Immune System Algorithm for Structural Optimization, , The Eighth International Conference on Computational Structures Technology and The Fifth International Conference on Engineering Computational Technology, Las Palmas de Gran Canaria, Spain, , 2006-09-12-
2006	史建中; Shih, C. J.; 陳文祥; Chen, W. S.; 王正堯; Wang, Z. Y., 合理有效的回應表面近似法結構最佳化設計, , 中華民國力學學會第三十屆年會暨全國力學會議, , 2006-12-15-
2006	史建中; 陳文祥; 王正堯, 合理有效的回應表面近似法結構最佳化設計, , 第三十屆中華民國力學年會暨全國力學會議, , 2006-12-15-
2006	史建中; 陳運正; 王正堯, 工程模糊最佳化的更新雙切法設計, , 第三十屆中華民國力學年會暨全國力學會議, , 2006-12-15-
2005	史建中; 王正堯, 回應表面結構的階切模糊限制最佳化設計, , 第五屆海峽兩岸航空太空學術研討會, , 2006-03-14-
2005	史建中, 形變式微動平台放大器的拓樸最佳化設計, , 中國機械工程學會第二十二屆全國學術研討會, 桃園中壢, , 2005-11-25-
2005	史建中, An Integrated Design of Flexure Hinges and Topology Optimization for Monolithic Compliant Mechanism, , The Ninth World Conference on Integrated Design & Process Technology, San Diego, California, USA, , 2006-06-25-
2005	史建中, A Two-Stages Topological Optimum Design for Monolithic Compliant Microgripper Integrated with Flexure Hinges, , The International MEMS2006, Singapore, , 2006-05-09-
2005	王正堯; Wang, Z. Y.; 史建中; Shih, C. J.; 李鴻文; Lee, H. W., 單切與雙切策略的模糊回應表面法結構最佳設計, , 中華民國力學學會第二十九屆全國力學會議, , 2005-12-16-
2005	林志豐; Lin, C. F.; 史建中; Shih, C. J., 熱致動微撓性夾持器的拓樸與形狀最佳化設計, , 中華民國力學學會第二十九屆全國力學會議, , 2005-12-16-
2005	Shih, C. J.; Kuan, T. L.; Deng, C. J.; Wang, Z. Y., Immune Based Evolutionary Algorithm with Enhanced Expression Strategy for Pareto Optimization, , 中華民國第十三屆模糊理論及其應用會議=2005 the 13th National Conference on Fuzzy Theory and Its Applications, , 2005-09-30-
2004	Shih, C. J.; Lee, H. W., Modified level-cut approaches for unique design in large-scale fuzzy constrained structural optimization, , Proceedings of the Seventh International Conference on Computational Structures Technology, pp.292, , 2004-09-01-
2004	史建中; 李鴻文; 潘秉昌; 黃正良, 回應表面近似法於大型結構最佳化設計, , 2004航空機械工程學術研討會, , 2004-10-01-
2004	史建中; 沈裕閔; 王正堯; 陳匡佑, 穩健最佳化機構合成設計, , 中國機械工程學會第二十一屆全國學術研討會論文集, , 2004-11-01-
2004	林志豐; 史建中; 陳信驛, 微型撓性夾持器的拓樸最佳化及改善設計, , 中華民國第二十八屆全國力學會議, , 2004-12-01-
2004	林志豐; 史建中; 陳信驛; 黃正良, 撓性微夾持器最佳化性能設計, , 中國機械工程學會第二十一屆全國學術研討會論文集, , 2004-11-01-
2004	李鴻文; 史建中; 黃正良; 王正堯, 處理模糊限制條件的結構最佳化近似法設計, , 中華民國第二十八屆全國力學會議, , 2004-12-01-
2004	史建中; 陳博軒; 管姿倫, 生物免疫系統之模擬演算法於結構優化設計, , 第四屆海峽兩岸航空航天學術研討會, , 2004-08-01-
2004	史建中; 管姿倫; 潘秉昌, 混合免疫基因演算法最佳化, , 第十二屆模糊理論及其應用會議, , 2004-11-01-
2003	李鴻文; 史建中, 大型模糊結構的最佳階切唯一解設計, , 第二十屆機械工程研討會論文集, , 2003-12-05-
2003	陳博軒; 史建中, 改良表示運算的遺傳演算法於大型結構最佳化設計, , 2003 人工智慧、模糊系統及灰色系統聯合研討會，臺灣, , 2003-12-01-
2003	Shih, C. J., Using entropy generation function for optimal re-design of plate-fin heat sinks on electronic component, , 第二十屆機械工程研討會論文集, , 2003-12-05-
2003	黃正良; 史建中, 合理最佳階切法於大型模糊工程設計題目, , 第27屆中華民國力學學會年會暨全國力學會議, , 2003-12-12-
2003	陳信驛; 林志豐; 史建中, 微型撓性夾持器的拓樸最佳化設計, , 第27屆中華民國力學學會年會暨全國力學會議, , 2003-12-12-
2003	沈裕閔; 史建中, 多目標合理性穩健最佳結構設計, , 第27屆中華民國力學學會年會暨全國力學會議, , 2003-12-12-
2003	林志豐; 史建中, 改良印字頭撓性放大結構的拓樸最佳化設計, , 第27屆中華民國力學學會年會暨全國力學會議, , 2003-12-12-
2002	管姿倫; 史建中, 改良表示運算的遺傳演算法於最佳化工程設計, , 機械工程學會第十九屆全國學術研討會議, , 2002-11-01-
2002	Lin, C. F.; Shih, C. J., Topological synthesis of a compliant mechanism through several prescribed positions, , The Second China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Busan, Korea, , 2002-11-01-
2002	Lin, Y. Y.; Chi, C. C.; Shih, C. J., Supplementary α-cuts approach for unique optimum structural design with fuzzy resources, , The Second China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Busan, Korea, , 2002-11-01-
2002	曾新超; 史建中, 應用模糊多目標策略於成本品質控制的最佳公稱與機械容差設計, , 2002中華民國第十屆模糊理論及其應用會議=2002 Tenth National Conference on Fuzzy Theory and It's Applications, , 2002-12-05-
2002	陳則宇; 史建中, 合理穩健階切法之最佳化設計, , 2002中華民國第十屆模糊理論及其應用會議=2002 Tenth National Conference on Fuzzy Theory and It's Applications, , 2002-12-05-
2002	紀承昌; 史建中, 曲柄組件的模糊多目標最佳機械容差設計, , 機械工程學會第十九屆全國學術研討會議, , 2002-11-01-
2002	Shih, C. J.; Chi, C. C., Alternative α-cut method for multiobjective fuzzy structural design, , The 26th National Conference on Theoretical and Applied Mechanics, , 2002-12-01-
2002	Shih, C. J.; Chi, C. C., Integrated mechanical design method of rrobust performances to tolerancing with fuzzy multiobjective optimization, , The Second China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Busan, Korea, , 2002-11-01-
2002	劉松柏; 郭良羽; 史建中, 強制變位靜不定管結構物的裂縫進展壽命評估, , 中華民國力學學會第二十六屆年會暨全國力學會議論文集，9頁, , 2002-12-20-
2002	林志豐; Lin, C. F.; 史建中; Shih, C. J., 模擬S型撓性機構的拓樸最佳化設計, , 第二十六屆中華民國力學學會年會暨全國力學會議, , 2002-12-20-
2002	史建中; 紀承昌; Shih, C. J.; Chi, C. C., 多目標模糊結構設計的替代alpha階切策略, , 中華民國力學學會第二十六屆中華民國力學學, , 2002-12-20-
2002	史建中; 紀承昌, 多目標模糊結構設計的替代α階切策略, , 第26屆中華民國力學學會年會暨全國力學會議, , 2002-12-20-
2001	蕭仁宏; 史建中, 目標及限制函數具有模糊參數的最佳化結構設計, , 中華民國第九屆模糊理論及其應用會議, , 2001-11-01-
2001	Shih, C. J.; Liu, G. C., Optimal thermal design of plate-fin heat sinks by entropy generation rate, , The Sixth Biennial World Conference on Integrated Design & Process Technology, Pasadena, California, , 2002-06-01-
2001	史建中; 紀承昌, 合理唯一解之階切模糊最佳化及工程應用, , 中華民國第九屆模糊理論及其應用會議, , 2001-11-01-
2001	史建中; 曾新超; 黃錦堂, 模糊策略的最佳目標性能穩健工程設計, , 中華民國機械工程學會第十八屆全國學術研討會議, , 2001-12-01-
2001	Shih, C. J.; Huang, J. T., Robust feasible engineering optimization using parameter variation patterns of hyper-sphere, , International Conference on Modelling and Simulation, Changsha, Hunan, China, , 2001-09-01-
2001	古國昌; 史建中, 應用串並聯解析結構可靠度之最佳化設計, , 中華民國力學學會90年度年會暨第25屆全國力學會議=25 National Conference of Theoretical and Applied Mechanics, , 2001-12-15-
2001	林志豐; Lin, C. F.; 史建中; Shih, C. J., 印字頭撓性放大結構的拓樸最佳化設計, , 中華民國力學學會90年度年會暨第25屆全國力學會議=25 National Conference of Theoretical and Applied Mechanics, , 2001-12-15-
2000	Shih, C. J.; Tseng, T. J., Reliability based optimum structural design for robust performance using fuzzy formulation strategy, , The 20th International Congress of Theoretical and Applied Mechanics, Chicago, U.S.A., , 2000-08-01-
2000	Shih, C. J.; Tseng, T. J.; Huang, J. T., Overall robust engineering optimization using parameter variation patterns, , The Fourth World Congress of Structural and Multidisciplinary Optimization, Dalian, China, , 2001-06-01-
2000	史建中; 柳貴琦; 黃錦堂, 高信賴度的穩健機械結構模糊最佳化設計, , 中華民國第八屆模糊理論及其應用會議，頁161-166, , 2000-12-01-
2000	林志豐; 史建中, 應用霍普菲爾類神經網路及有限元素法的結構最佳化設計, , 第三屆海峽兩岸航空太空學術研討會論文集，頁289-294, , 2001-05-29-
2000	柳貴琦; 史建中, 應用PHOENICS於氣冷式高密度熱交換器電子熱傳分析及設計, , 第三屆海峽兩岸航空太空學術研討會, , 2001-05-29-
2000	郭良羽;史建中;劉松柏, 具裂縫靜不定管結構的強制變位塑性行為解析, , 八十九年度中華民國力學學會年會暨第二十四屆全國力學會議=24th National Conference on Applied and Theoretical Mechanics, , 2000-12-09-
1999	Shih, C. J.; Huang, J. T., Robust feasible structural engineering optimization based on hohenbichler-rackwitz's reliability, , Proceedings of the 16th national conference on mechanical engineering, CSME, Hsin-Chu, pp.805-809, , 1999-12-03-
1999	Shih, C. J.; Yang, Y. C., Neural network based penalty function strategy for integer and discrete engineering optimization, , Proceedings of the first China-Japan-Korea symposium on optimization of structural and mechanical systems, Xi'an, China, pp.233-240, , 1999-10-31-
1999	郭良羽; 史建中, 龜裂矩形樑的塑性行為解析, , Proceedings of the 16th national conference on mechanical engineering, CSME, Hsin-Chu, pp.29-36, , 1999-12-03-
1999	陳至行; 史建中, 表示及懲罰策略之遺傳演算微熱沉最佳化設計, , 第六屆微機電系統成果研討會，台北, , 2000-03-31-
1999	Shih, C. J.; Chang, C. C., Hopfield neuron based fuzzy engineering optimization, , Proceedings of the eighth international fuzzy systems association world congress v.2, Taipei, Taiwan, R.O.C., pp.999-1003, , 1999-08-17-
1999	Shih, C. J.; Hsu, C. H., Global structural optimum design by ameliorative annealing method, , Proceedings of the first international conference on advances in structural engineering and mechanics v.1, Seoul, Korea, pp.631-636, , 1999-08-23-
1999	陳世徵; 史建中; 劉松柏, 靜不定龜裂管結構的壽命評估及最佳設計, , 中華民國力學學會第廿三屆全國力學會議=The 23nd National Conference on Theoretical and Applied Mechanics, , 1999-12-17-
1999	陳至行; 史建中, 電子元件之微熱沉最佳化設計, , 第一屆海峽兩岸微系統科技研討會論文集，頁214-218, , 2000-05-17-
1998	史建中; Shih, Chien-jong; Tseng, T. J., Integrated robust engineering optimization and process technology, , The fourth world conference on integrated design & process technology, Kusadasi, Turkey, , 1999-06-27-
1998	史建中; Shih, Chien-jong; Tseng, T. J., Robust feasible engineering optimization using fuzzy nonlinear programming, , The 3rd world congress of structural and multidisciplinary optimization, Buffalo, New York, , 1999-05-17-
1998	曾廷章; 史建中, 模糊最佳化應用於合理穩健工程設計, , 中華民國第六屆模糊理論及其應用會議論文集，台中，頁589-594, , 1998-12-11-
1998	徐君豪; 史建中, 改良式模擬退火最佳化工程設計, , The 15th national conference on mechanical engineering, CSME, Tainan, , 1998-11-01-
1998	楊奕強; 史建中, 網路架構型之非線性工程最佳設計, , The 15th national conference on mechanical engineering, CSME, Tainan, , 1998-11-01-
1998	劉松柏; 陳世徵; 史建中, 龜裂管結構之力學模型建立及解析, , 中華民國力學學會第廿二屆全國力學會議=The 22nd National Conference on Theoretical and Applied Mechanics, , 1998-12-19-
1998	曾珽章; 史建中, 模糊最佳化應用於合理穩健工程設計, , 中華民國第六屆模糊理論及其應用會議=1998 Sixth National Conference on Fuzzy Theory and Its Application, , 1998-12-11-
1998	史建中, 電廠管路結構劣化之健全性解析評價及改善(II), , 八十八年度電力科技產業學術合作研究計畫期中報告, , 1999-07-01-
1997	Shih, C. J.; Wang, C. S., Fuzzy probability and stochastic engineering optimization, , 1997fifth national conference on fuzzy theory and applications, Taiwan, , 1997-12-19-
1997	史建中; Shih, Chien-jong; Wang, C. S., Multiobjective fuzzy and stochastic structural optimization using Hohenbichler-Rackwitz's reliability, , Structural optimization, Victoria, Australia, pp.409-418, , 1998-02-01-
1997	史建中; Shih, Chien-jong; Wang, C. S.; 林堉溢; Lin, Yuh-yi, Multicriterion fuzzy optimization for stochastic and maximizing reliability engineering design, , Integrated design and process technology : IDPT 6, pp.106-112, , 1998-07-05-
1997	史建中; Shih, C. J., 以多目標模糊最佳化方法解隨機性及可靠性的結構最佳設計, , 第二屆海峽兩岸航空航天技術及流固耦合學術研討會，北京, , 1998-07-03-
1997	Shih, C. J.; Chang, C. C., Fuzzy constrained engineering optimization using hopfield neural network, , The 14th National Conference on Mechanical Engineering, CSME, Taiwan, , 1997-12-01-
1996	Shih, C. J.;Wang, C. S., Multiobjective fuzzy and stochastic engineering optimization with maximizing reliability, , 1996 Asian Fuzzy Systems Symposium─Soft Computing in Intelligent Systems and Information Processing, , 1996-12-11-
1996	Shih, C. J.; Liu, Woe-Chun, Fuzzy global criterion approach with pairwise comparisons for multiobjective structural design, , Proceedings of the 20th National Conference on Theoretical and Applied Mechanics (III), Taiwan, pp.254-260, , 1996-12-01-
1996	Shih, C. J.; Wangsawidjaja, R. A. S., Fuzzy and reliability based optimization for robust structural design, , Proceedings of The Third Asian-Pacific Conference on Computational Mechanics, v.1, Korea, pp.565-570, , 1996-09-16-
1996	史建中; 王建生, 強化機械結構可靠度的多目標模糊最佳化設計, , 中國機械工程學會第十三屆全國學術研討會=The Thirteen National Conference of the Chinese Society of Mechanical Engineers, , 1996-11-30-
1996	Shih, Chien-jong; Wang, C. S.; Lin, Yuh-yi, H-L信賴度基的最佳化技術於多目標模糊及隨機的設計 Hasofer-Lind's reliability based optimization for multiobjcetive fuzzy and stochastic design problem, , Sixth IEEE international conference on fuzzy systems v.3, , 1997-07-01-
1996	史建中; Shih, C. J.; 劉偉均; Liu, Woe-Chun, 成對比較的多目標模糊法最佳結構設計, , 中華民國力學學會第二十屆全國力學會議=The 20th National Conference on Theoretical and Applied Mechanics, , 1996-12-14-
1996	史建中, 工程系統設計的模糊最優化方法=Opeimization Techniques for Engineering Design, , 最佳化方在工程設計之應用講習=Opeimization Techniques for Engineering Design, , 1997-07-21-
1996	Shih, C. J.; Wang, C. S.; Lin, Yuh-Yi, Hasofer-lind's reliability based optimization for multiobjective fuzzy and stochastic design problem, , Fuzzy Systems, 1997., Proceedings of the Sixth IEEE International Conference on, V.3, pp.1191-1196, , 1997-07-01-
1995	Shih, C. J.; Wu, C. M., Design optimization of machine-tool spindle with preloaded bearings through minimized cutter deflection, , The 12th National Conference on Mechanical Engineering, CSME, Taiwan, , 1995-11-01-
1995	Shih, C. J., Fuzzy multiobjective optimization techniques and process for engineering design, , The First World Conference on Integrated Design & Process Technology, USA, , 1995-12-06-
1994	Shih, C. J.; Wangsawidjaja, R. A. S., Multiobjective fuzzy structural optimization with statistical constraints and design variables, , The 11th National Conference on Mechanical Engineering, CSME, Taiwan, , 1994-11-19-
1994	Shih, C. J.;Yang, T. L., Function mapping strategy in nonlinear optimization using neural networks, , 1994 International Symposium on Artificial Neural Networks, , 1994-12-15-
1993	Shih, C. J.; Lai, T. K.; Chang, C. J., Fuzzy optimization for engineering design in mixed discrete and integer variable problems, , The 2nd Biennial European Joint Conference on Engineering Systems Design and Analysis, v.64, UK, pp.215-220, , 1994-07-01-
1993	史建中; Shih, Chien-jong; Yu, K. G.; Chang, C. J., Alternative global criterion approach for fuzzy structural optimum design, , 第一屆亞洲模糊系統研討會 = First Asian Fuzzy Systems Symposium (AFSS '93), Singapore, pp.76-84, , 1993-11-23-
1993	楊宗龍;史建中, 類神經網路的線性最佳化, , 中國機械工程學會第十屆學術研討會=The Tenth National Conference of the Chinese Society of Mechanical Engineers, , 1993-12-03-
1993	Shih, C. J.; Chang, C. J., Mixed-discrete nonlinear fuzzy optimization for multiobjective engineering design, , The 35th AIAA/ASME/ASCE/AHS/ASC Structures and SDM Conference, Hilton Head, SC, USA, pp.2240-2246, , 1994-04-18-
1992	史建中; 吳志民, 結合刀具及夾持器的主軸最佳設計, , 第六屆全國自動化科技研討會論文集(二)，台中市，頁836-843, , 1993-07-03-
1992	史建中, CNC切削中心主軸的多目標最佳化設計 Computerized multiobjective optimum design of milling spindle in CNC machining center, , The 9th national conference of the CSME v.1, , 1992-11-01-
1992	史建中, Computerized multiobjective optimum design of milling spindle in CNC machining center, , The 9th national conference of the CSME v.1, , 1992-11-01-
1992	史建中;余國駿, 目標權重法的模糊理論最佳化, , 一九九三中華民國第一屆Fuzzy 理論與應用研討會=The First National Symposium on Fuzzy Set Theory and Applications, , 1993-06-25-
1991	史建中, Fuzzy weighting optimization with multiobjective functions, , The 2nd international conference on automation technology, v.1, pp.285-290, , 1992-07-01-
1991	史建中; Shih, Chien-jong; Chi, C. T., 具阻尼性及多變數複合材料樑之設計最佳化, , 第八屆全國機械工程學術研討會論文集(三)，台北，頁1543-1550, , 1991-11-24-
1991	史建中; Shih, Chien-jong; Fan, Jung-ting, Microcomputer optimum design of power transmission shaft using three-dimensional finite shaft element, , The 2nd international conference on automation technology, v.2, pp.61-67, , 1992-07-01-
1991	Shih, C. J.; Lai, Tsing-Kuan, Fuzzy Weighting Optimization with Multiobjective Functions, , The Second International Conference on Automation Technology, , 1992-07-04-
1991	Shih, C. J.; Fan, Jung-Ting, Microcomputer Optimum Design of Power Transmission Shafts Using Three-Dimensional Finite Shaft Element, , The Second International Conference on Automation Technology, , 1992-07-04-
1990	Shih, C. J., Load distributions along a short-fiber in discontinuous fiber composite using advanced modified shear-lag analysis, , 中華民國力學學會第十四屆全國力學會議=The 14th National Conference on Theoretical and Applied Mechanics, , 1990-12-14-
1990	Shih, C. J., Load Distributions Along a Short-Fiber in Discontinuous Fiber Composites Using Advanced Modified Shear-Lag Analysis, , 中華民國力學學會第十四屆全國力學會議=The 14th National Conference on Theoretical and Applied Mechanics, , 1990-12-14-
1986	Hajela, P.; Shih, C. J., Optimum synthesis of polymer matrix composites for improved internal material damping characteristics, , The 28th IAA/ASME/ASCE/AHS/ASC Structures and SDM Conference, USA, , 1987-04-01-

年度	書名
2013	Shih, Chien-jong, A Niche-Related Particle Swarm Meta-Heuristic Algorithm for Multimodal Optimization, A niche-related particle swarm meta-heuristic algorithm for dealing with multimodal optimization problem is proposed in this paper. The inspiration and numerical algorithm are presented and the Rastrigin function with numerous local optima is adopted as the illustrative example. Proposed multimodal particle swarm optimization (MPSO) is sensitive to predetermined multimodal numbers, particle numbers, niche radius, and convergent iterations. The results show that the proposed MPSO is accurate and stable. The presented MPSO is ready for applied engineering optimization and further application., Cham: Springer International Publishing
2000	Shih, C. J.; Yang, Y. C., Mixed Discrete and Integer Structural Optimization using Generalized Hopfield Network based Sequential Unconstrained Mimimization Technique with Additional Penalty Strategy, , Edinburgh, UK : Civil-Comp Press
1997	史建中; Shih, Chien-jong; Wang, C. S., Multiobjective fuzzy and stochastic structural optimization using hohenbichler-rackwitz's reliability, , Victoria, Australia: Oxbridge Press
1997	史建中; Shih, C. J., Parameter optimization with fuzzy formulation for engineering system design, , 中國北京：科學出版社
1997	Shih, C. J., 工程系統設計的模糊最優化方法, , 臺北市：台灣科技大學
1992	Shih, C. J.; Chi, C. T., Maximized Adams damping in the design of composite laminate beam by branch-and-bound with max-partial derivative branching algorithm, , New York: American Society of Mechanical Engineering

年度	活動名稱	主題/發表題目	活動單位	活動期間
109	109-1員工福利委員會才藝班	109-1員工福利委員會才藝班（2020-10-05 10:00:00 ~ 2020-12-31 17:00:00）	體育教學與活動組	2020-10-05 ~ 2020-12-31
105	淡江大學頂石課程教學研習活動	淡江大學頂石課程教學研習活動（2016-11-25 12:00:00 ~ 14:00:00）	文學院	2016-11-25 ~ 2016-11-25
105	高等教育品牌建立與行銷招生策略	高等教育品牌建立與行銷招生策略（2017-04-20 13:00:00 ~ 15:00:00）	工學院	2017-04-20 ~ 2017-04-20
105	105-2員工福利委員會才藝班-桌球班(週四)	105-2員工福利委員會才藝班-桌球班(週四)（2017-03-06 12:00:00 ~ 2017-06-09 14:00:00）	物理學系	2017-03-06 ~ 2017-06-09
104	104-2員工福利委員會才藝班-桌球班(週四)	104-2員工福利委員會才藝班-桌球班(週四)（2016-03-07 12:00:00 ~ 2016-06-24 14:00:00）	事務整備組	2016-03-07 ~ 2016-06-24
95	Integrated Design Process Including Flexure Hinge for Topological Optimization of Compliant Mechanis	北京工業大學 Integrated Design Process Including Flexure Hinge for Topological Optimization of Compliant Mechanis	北京工業大學	2006-11-03 ~ 2006-11-03
93	講題：機電系統之微撓性機構一體化最佳設計	正修科技大學講題：機電系統之微撓性機構一體化最佳設計	正修科技大學	2005-05-26 ~ 2005-05-26

年度	發表日期	名稱
102	2013-08	工程設計的粒子群元啟發式最佳化系列研發(I)
101	2012-08	全面研發免疫演化法的設計最佳化(II)
99	2011-01	技術先進的三點近似法工程最佳化研究
97	2009-01	機車進排氣管路的多目標實驗最佳化設計
96	2008-01	全面研發免疫演化法的設計最佳化(I)
95	2007-01	大型規格結構的模糊最佳化設計 (III)
94	2006-01	大型規格結構的模糊最佳化設計(II)
93	2005-01	大型規格結構的模糊最佳化設計
92	2004-01	微機電順從機構的拓樸最佳化及設計(III)
91	2003-01	微機電順從機構的拓樸最佳化及設計(II)
90	2002-01	微機電順從機構的拓樸最佳化及設計(I)
89	2001-01	模糊設計變數及模糊參數的全面穩健機械結構最佳化設計
88	2000-01	全面穩健機械最佳化設計(II)
88	2000-01	全面穩健機械最佳化設計
87	1999-01	應用於微處理器之微冷卻器整合研究-微冷卻器之封裝及測試技術研究
87	1999-01	電廠管路結構劣化之健全性解析評價及改善(II)
86	1998-01	強健信賴度為基的最佳化方法於多目標工程設計研究
86	1998-01	電廠管路結構劣化之健全性解析評價及改善（II）
85	1997-01	電廠管路結構劣化之健全性解稀評價及改善
84	1996-01	模糊神經網路演繹法的最佳結構設計
83	1995-01	類神經網路的工程設計最佳化
82	1994-01	多目標軟性最佳化的比較及棣屬函數的研究(II)
81	1993-01	多目標軟性最佳化的比較及隸屬函數的研究
81	1993-01	應用有限元素法於工具機主軸的多目標最佳化設計
80	1992-01	模楜理論多目標與混合變數的交談式最佳化
80	1992-01	應用有限元素法於工具機主軸的多目標最佳化設計
79	1991-01	具阻尼性及多變數的層板式複合材料樑柱之最佳化設計

年度	獎項名稱	頒獎單位
103	Design of Car Hood of Sandwich Structures for Pedestrian Safety	淡江大學
101	Experimental Optimization and Analysis of Intake and Exhaust Pipeline for Small Engine Motorcycle	淡江大學
100	STRUCTURAL TOPOLOGY OPTIMIZATION WITH EMPIRICAL CONSTRAINTS	淡江大學
100	Experimental Design Optimization for Two-pipeline Intake System on a Small Engine	淡江大學
99	Topological Optimum Design Considering Stress Constraint Using Approximate Function	淡江大學
99	An Integrated Design Optimization for Monolithic Mechanical Amplifier in PZT Nano-Positioning Stage	淡江大學
98	Computational Identification of Link Adjacency and Joint Incidence in Kinematic Chains and Mechanisms	淡江大學
98	Immune Based Hybrid Evolutionary Algorithm for Pareto Engineering Optimization	淡江大學
97	A post-design of topology optimization for mechanical compliant amplifier in MEMS	淡江大學
97	Modified double-cuts approach in 25-bar and 75-bar fuzzy truss optimization	淡江大學
96	An intergrated design of flexure hinges and topology optimization for monolithic compliant mechanism	淡江大學
96	An immunity based hybrid evolutionary algorithm for engineering optimization	淡江大學
95	Multiobjective Design Optimization of Flexure Hinges for Enhancing the Performances of Micro-Mechanisms	淡江大學
95	Reliability-Based Optimization of Robust Feasibility in Mechanical Design Using PVP Technique and Fuzzy Formulation	淡江大學
94	Level-Cut Approaches of First and Second Kind for Unique Solution Design in Fuzzy Engineering Optimization Problms	淡江大學
94	Optimal Design Methodology of Plate-Fin Heat Sinks for Electronic Cooling Using Entropy Generation Strategy	淡江大學
93	Alternative α-level-cut methods for optimum structural design with fuzzy Resources	淡江大學
93	Crack Propagation Analysis of Statically Indeterminate Bean by Elastic-Plastic Fracture Mechanics	淡江大學
92	廣義霍普菲爾神經網路為基的外加處罰函數無限制次序最佳化技術	淡江大學
88	Hopfield Neuron Based Nonlinear Constrained Programming to Fuzzy Structural Engineering Optimization	淡江大學
87	Methods of pairwise comparisons and fuzzy global criterion for multiobjective optimization in structural engineering	淡江大學
86	Weighting objectives strategy in multicriterion fuzzy mechanical and structural optimization	淡江大學
86	Fuzzy and improved penalty approaches for Multiobjective mixed-discrete optimization In structural systems.	淡江大學
85	Pareto optimization of alternative global criterion method for fuzzy structural design	淡江大學
85	模糊或然率程式法的多目標工程設計最佳化	淡江大學
84	Mixed-Discrete fuzzy programming for nonlinear engineering optimization	淡江大學
84	混合變數型的非線性模糊工程最佳化	淡江大學
83	Fuzzy weighting optimization with several objective functions in structural design	淡江大學
82	亞當氏阻尼複合樑的偏微分枝法最優設計	淡江大學
82	Microcomputer Optimum Design of Power Transmission Shafts Usinf Three-Dimensional Finite Shaft Element	淡江大學
81	具阻尼性及多變數複合材料樑之設計最佳化	淡江大學
81	多目標軟性最佳化的比較及隸屬函數的研究	淡江大學
80	應用有限元素法於工具機主軸的多目標最佳化設計	淡江大學
80	Load Distributions Along a Short-Fiber in Discontinuous Fiber Composites Using Aduanced Modified Shear-Lag Analysis	淡江大學
79	Optimum design of laminated composite structures for enhanced damping characteristics	淡江大學
78	(新聘博士免附著作)	淡江大學